I have a piece of hand appliqué which I have been working on for about three months (off and on), as I just feel too bored to do it for more than three days in a row)). As I took it out for another round, it got me thinking about the stitches used for hand appliqué, and I decided to run a small comparison and share it with you.
First of all I must register my frustration with a lack of clear and unambiguous names for hand stitches in English))) I had to choose the names which seem most recognizable.
When I do hand appliqué I mostly use the
blind stitch (aka ladder stitch or slipstitch), however, in this current project (working title - "Beach extravaganza") I faced a problem - the background fabric was too large to handle conveniently, so I quickly switched to the more traditional
appliqué stitch (I find that it doesn't have any special name in books and tutorials on appliqué, but to those who are familiar with clothes making it may be known as
hemming stitch or fell stitch). It's a tiny and almost invisible version of the diagonal stitch.
So, here is a little comparative study of the two stitches for anyone facing a similar choice. And I have to stress that I use them both with appliqué pieces that already have their edges turned under with the help of freezer paper and/or starch or any other method, so the edge that you see is actually a fold.
So, let's look at each of the stitches closely:
Ladder Stitch (Slipstitch, Blind Stitch)
I find it easier to make when holding the background fabric with appliqué element pinned to it in my left hand, with the fingers below the fabric and the thumb above. This means that this stitch is best used for appliqué on a separate block or a small project (or the edge of a large one, as I did for this comparison).
Tie a knot on your thread and slip the needle from the wrong to the right side of fabric, so that it comes out in the background fabric but right next to the appliqué edge. Insert the needle into the fold (this is why it's good to hold the whole thing so that you can see the "profile" of your appliqué element) and move it inside there for 2-3mm (1/8 in), then bring it out of the appliqué and right into the background, move it 2-3mm (1/8 in) underneath the fabric and bring it back up. That's one stitch that is done in one movement (with practice you can make several stitches without pulling the needle out).
If you stick your needle right into the fold of the appliqué piece, no stitching will be visible on the right side (that's why it's called blind stitch, after all), the piece will look like it's just lying atop the background.
Any minor disturbances in the fabric will disappear after pressing, and even further after quilting.
Here is a detail from one of my previous quilts,
Waltz of the Flowers, with blind-stitch appliqué. You can see the line of quilting around the tulip, but not really any stitches that attach it to the background (except at the inner corners where I put extra stitches to prevent fraying).
There is one point, though, to consider about the blind stitch: it actually is a variation of the running stitch, which is widely known to be the least durable of all hand stitches. So, if you only quilt around your appliqué design, as I mostly do, you appliqué element is hanging by a thread, as it were, and there is a
theoretical possibility that the stitching may get torn when handling the quilt. It hasn't happened to mine yet, but they are not yet that old (although the one above is on the bed of a four-year-old, which means no scruples in handling))). If anyone has any practical experience with that, please share in the comments.
Appliqué Stitch (Hemming Stitch, Diagonal Stitch)
The advantage of the hemming stitch in hand appliqué is that it can be done on the table, with your both hands on top of the fabric, which may be the decisive point when your background is over a meter square, as mine is in this case.
Tie a knot and slip your needle underneath the fabric (you'll only need to get underneath for the beginning and the end of your stitching), bring it out in the background fabric, but right next to the appliqué edge. Make a tiny stitch into the appliqué piece, perpendicular to its edge, catching just a couple of threads, feel your needle touch the table and slide it along the table surface for 2-3mm (1/8 in), then bring it back up, right next to the appliqué piece edge. In this method, I think, it's impossible to make more that one stitch in a go.

If you really manage to catch only a couple of threads, all you'll see on the right side is a row of tiny dots, which have their own charm and are for some people the definitive feature of hand appliqué. However, that also means your thread must match the appliqué color really well.

And here is another piece from the same project to showcase the dots))) If you step back a meter or two, you won't see them at all.
Being twice as dense and not as straight as the blind stitch, the appliqué stitch is more durable (after all, it's a variation of the diagonal or the whipstitch), though if your quilt is destined to peacefully hang on the wall that might not be an important consideration.
Summing up
So, here are they are side by side, can you spot the difference?
And to sum it all up:
For those who have born with me thus far, a sneak peak of the company these two starfish guys are keeping:
So, this is my take on two stitches for invisible hand appliqué, both of which work great. It would be really interesting to hear what stitches you prefer for hand appliqué and what you call them. Please share your experiences and your thoughts on this))